Living Room Ceiling Light

Online

192.0.2.46 ESP32 Tasmota 14.3.0

Friendly name 1 Shown in the Tasmota UI and Home Assistant.

Friendly name 2 Second relay or channel, if the device has one.

Friendly name 3 Third relay or channel.

Friendly name 4 Fourth relay or channel.

Hostname Network host name: letters, digits and '-'.

Telemetry period (s) 0 turns telemetry off, otherwise 10 to 3600 seconds.

Power on state Relay state after power loss. Fleet policy: 0, so a power cut never writes the relay state to flash.

Save data (s) 0 saves settings only on explicit changes (fleet policy); otherwise seconds between saves (up to 3600).

Options

SetOption0 (save_state) Restore relay state after power loss. Fleet policy: 0 on ESP8266 to spare the flash; ESP32 devices may use 1.

SetOption3 (mqtt_enabled) Enable MQTT. Turning MQTT off makes the device invisible to tasmofleet's MQTT health.

SetOption4 (mqtt_response) MQTT replies as RESULT instead of %COMMAND%. Changes the shape of command replies on MQTT.

SetOption19 (hass_discovery) Home Assistant discovery (classic Tasmota integration). Home Assistant discovery of the classic Tasmota integration.

MQTT topic Letters, digits, '.', '_' and '-'. Changing it moves the device to other MQTT topics.

MQTT full topic Pattern with %topic% or %hostname%, ending in '/'.

MQTT host Host name or IP address of the broker.

MQTT port 1 to 65535.

MQTT user No blanks, at most 64 characters.

MQTT password Write-only. Leave empty to keep the stored password.

NTP server 1 Host name or IP address.

NTP server 2 Host name or IP address.

NTP server 3 Host name or IP address.

Timezone 99 uses the TimeDst/TimeStd rules; otherwise -13 to 13 or +HH:MM.

Daylight saving rule Hemisphere, Week, Month, Day, Hour, Offset (minutes), separated by commas, e.g. 0,0,3,1,2,120.

Standard time rule Hemisphere, Week, Month, Day, Hour, Offset (minutes), separated by commas, e.g. 0,0,10,1,3,60.

Applied immediately and saved to the device once.